Helping Hand Message board
is being replaced by -

Ask A Handyman
Please post new questions there.

| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

A Handyman Helping Hand

Re: bifold door

Posted By: Nino
Thursday, 21 December 2000, at 10:10 p.m.

In Response To: Re: bifold door (Joe)

I believe the problem you're refering to has to do with the hight adjustment of the door and whether the door is square with the track. First, see if you can raise the door by adjusting the bottom pivot. raise it as far as it can go without binding the door. If this solves your problem, then your done, if not, then check to see if when you close the door if the door statrs to run out of the track. If it does, you'll have to shim the track at that point to maintain contact. You may also be able to adjust the door at the pivots to set it square with the track. Unfortunately, it may then not be plumb with the side jamb.

Messages in This Thread

| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

A Handyman Helping Hand is maintained with WebBBS 3.12. and proudly sponsored by Productive Connection